Product knowledge introduction of female connector

The function of the female connector:

This circuit is blocked before the blocking or isolating circuit, as a bridging function, assuming the task of current or signal transmission. The headlight connector is mainly used for the transmission of signals and images between the front and rear seats required by modern luxury cars, and other customized connectors are widely used in dashboards, antennas, vehicle information interconnection, intelligent transportation systems, electronic non-stop toll collection systems, etc. The bull connector is usually composed of a square plastic socket and a number of neatly arranged square pins. The difference between the connector and the bull connector is that the simple bull removes the buckles on both sides. Usually used with pins to form a board-to-board connection; or used in conjunction with a board-wire electronic wiring harness; or independently connected to the board to board. Classification of female connectors:

1、Female connectors can be divided into 0.8mm, 1.0mm, 1.27mm, 2.0mm and 2.54mm according to the pitch

2、The main connector is divided according to the height of the plastic and whether it is concave and convex: it can be divided into convex, semi-convex and full-convex.

3、The main connector is divided into U-type terminals and Y-type terminals according to the terminal type.

4、Packaging of female connector terminals: pan, bag, bulk, etc.

5、The terminal materials of female connectors include brass, phosphor bronze, etc.

6、The row connector uses plastic materials: pbt, pa46, pa6t, pa9t, etc.

7、The end surface electroplating treatments of the main connector are: gold plating, tin plating, nickel plating, imitation gold, etc.

8、Columns of female connectors: A row can be divided into single mothers, double mothers in a row, three mothers in a row, 4 mothers in a row, and the current ranking is the highest female connector row with 4 points.

9、Busbar connectors can be divided into 180-degree busbar (straight busbar), 90-degree busbar (bent-leg busbar), SMT busbar, etc. according to the installation method.

10、The row mother connectors are divided according to whether they need to be increased and whether they need to be positioned columns: one is a row mother connector with an inner positioning column, and the other is a row mother connector with an ear positioning column.